Send SMS without using number (Bulk SMS)

Send SMS without using number(Bulk SMS)

Yes, now you can send SMS WITHOUT ANY REGISTRATION (BULK SMS).

Now so many method for the send sms but i have some new tricks. I hope it help to you.

Method 1 : CLICK HERE Now just enter the number where you watn to send the SMS, They receive the SMS from TD***** like that.

Method 2 : CLICK HERE.

Method 3 : CLICK HERE.

Make Window 7 Genuine

Make your Window 7 Genuine

There are many way to crack the window 7. but after some time your window key is BLOCKED and your window get pirated then you have change the key or find the other tricks.

Here, i will tell you permanent solution for crack window 7.

Download the software which given below.

Run the software and choose "REMOVE WAT" when it completed all is set. just restart your window and It's done.

Do your at own risk and TECH1879 is not responsible if any damage...!!

.: Disclaimer :.

.: Disclaimer :.

The information provided in this blog tech1879.blogspot.com is only intended for research and educational purposes. I OR MY BLOG ARE NOT RESPONSIBLE FOR ANY PROBLEM. All of the information in this website is meant to help the reader develop a your skill to new technology and tips and tricks and hacker defense attitude in order to prevent the attacks discussed. In no way should you are the information to cause any kind of damage directly or indirectly. You implement the information given at your OWN RISK.

Free E-books

How to Know the IP address of a Person on Facebook

How to Know the IP address of a Person on FACEBOOK

This technique works when you are chatting with that person. The first demand of operation is to close all of the website and Messengers that you are using, even clean History and delete Cookies as precaution.

Now start chatting with that person.

The first thing you do is to open start->run->cmd.exe now in it type following command:

netstat –an

and wait and watch the foreign address will be the IP address

If u like the post do comment !!

.: How to configure Internet Connection Sharing in Windows XP :.

.: How to configure Internet Connection Sharing in Windows XP :.

How to use Internet Connection Sharing

To use Internet Connection Sharing to share your Internet connection, the host computer must have one network adapter that is configured to connect to the internal network, and one network adapter or modem that is configured to connect to the Internet.

On the host computer

On the host computer, follow these steps to share the Internet connection:

1. Log on to the host computer as Administrator or as Owner.
2. Click Start, and then click Control Panel.
3. Click Network and Internet Connections.
4. Click Network Connections.
5. Right-click the connection that you use to connect to the Internet. For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up.
6. Click Properties.
7. Click the Advanced tab.
8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection check box.
9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
10. Click OK. You receive the following message:
    When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP address 192.168.0.1. Your computer may lose connectivity with other computers on your network. If these other computers have static IP addresses, it is a good idea to set them to obtain their IP addresses automatically. Are you sure you want to enable Internet Connection Sharing?
11. Click Yes.

The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0

On the client computer

To connect to the Internet by using the shared connection, you must confirm the LAN adapter IP configuration, and then configure the client computer. To confirm the LAN adapter IP configuration, follow these steps:

1. Log on to the client computer as Administrator or as Owner.
2. Click Start, and then click Control Panel.
3. Click Network and Internet Connections.
4. Click Network Connections.
5. Right-click Local Area Connection, and then click Properties.
6. Click the General tab, click Internet Protocol (TCP/IP) in the This connection uses the following items list, and then click Properties.
7. In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address automatically (if it is not already selected), and then click OK. Note You can also assign a unique static IP address in the range of 192.168.0.2 to 192.168.0.254. For example, you can assign the following static IP address, subnet mask, and default gateway:

2. 1. 1. In the Local Area Connection Properties dialog box, click OK.
3. 1. 1. Quit Control Panel.

To configure the client computer to use the shared Internet connection, follow these steps:

1. Click Start, and then click Control Panel.
2. Click Network and Internet Connections.
3. Click Internet Options.
4. In the Internet Properties dialog box, click the Connections tab.
5. Click the Setup button. The New Connection Wizard starts.
6. On the Welcome to the New Connection Wizard page, click Next.
7. Click Connect to the Internet, and then click Next.
8. Click Set up my connection manually, and then click Next.
9. Click Connect using a broadband connection that is always on, and then clickNext.
10. On the Completing the New Connection Wizard page, click Finish.
11. Quit Control Panel.

When you now start Microsoft Internet Explorer, the client computer will try to connect to the Internet by using the host computer's shared Internet connection.

Troubleshooting

When you turn on Internet Connection Sharing on the host computer, the host computer's LAN adapter is automatically assigned the IP address of 192.168.0.1. Therefore, one of the following situations may occur:

• IP address conflict Each computer on the LAN must have a unique IP address. If more than one computer has the same IP address, an IP conflict occurs, and one of the network adapters turns off until the conflict is resolved. To resolve this conflict, configure the client computer to automatically obtain an IP address, or assign it a unique IP address.
• Loss of network connectivity If your network is configured with a different IP address range than Internet Connection Sharing uses, you will lose network connectivity with the host computer. To resolve this issue, configure the client computers to automatically obtain an IP address, or assign each client computer a unique IP address in the range of 192.168.0.2 to 192.168.0.254.

.: Recover your All windows password :.

.: Recover your All windows password :.

Hi friends,
here if you are forget your windows user password, don't worry its recover/brake by a software.
Its name is "OPHCRACK". Its open source software (free software).
OPHCRACK download form here.
some step for recover/brake your password. follow the step and feel free for your lost password

step 1 : download software from here or ophcrack.sourceforge.net/ here.
step 2 : after downloading burn it on cd.
step 3 : Put the cd in the cd rom.
step 4 : Restart the computer and Goto yout BIOS.
step 5 : select BOOT form CD ROM.
step 6 : Again Restart the computer and follow the instruction.
step 7 : Its completed.

Its simple but RISKY.

Note : Do any think on own risk

pls like me Facebook and tell your frnds for like and visit my site if have you any prob mail me on prashant1879@live.com see this on you-tube.

.: How to change the start button text on Windows XP :.

.: How to change the start button text on Windows XP :.


Tired of the boring old “start” button at the bottom left corner of your Windows XP’s monitor? Want something new to replace iit? Well here’s how to change it.

With a few modifications in the Windows Registry, you can replace the “start” text with anything you like. Great for achieving a new, custom look for your Windows XP. So let’s get started.

Warning: this tutorial is more for advanced users, and I'm not responsible if your system gets messed up. Only attempt the following
at your own risk.

Step 1: Modify explorer.exe

If the warning didn’t scare you enough, then the title of this step probably did. Yes, we are going to change Explorer, the backbone of your Windows XP, but don’t worry. Everything should be safe as long as you follow the steps closely.

As explorer is a binary file, we need a special tool to modify it. One of the best ones for this purpose is Resource Hacker. There are of course others that will get the trick done, but we will be using RH this tutorial so I recommend installing it to avoid making mistakes. Install it and let’s continue.

As always before changing anything. you want to back up. So open My Computer and navigate to and look for explorer. Copy paste it to a safe location on your hard drive.

Now that you’ve backed it up, fire up Resource Hacker and find the same explorer.exe.

When you’ve found and opened explorer in RH, navigate to String Table -> 37 -> 1033.

The “start” value is on line 4, after the 578. Change the text “start” to anything you want, making sure you keep the quotes.

In this example. I changed the text to Tech1879.

Press the Compile Script button to make Resource Hacker put together the code.

Now click File and Save the script as explorer.exe. into C: \WINDOWS\inf or another C: \WINDOWS subfolder.

Note: make sure you choose Save AS, NOT just save!!

And that’s all for the first step! Now let’s move onto the second one -modifying the registry.

Step 2: changing the registry.

By now, you have a modified explorer sitting in the /inf/ subfolder, so we need to tell Windows to use that one, instead of the original one still resting untouched.

To do this, we need to make just one simple registry modification. To open up the registry, press start (something else soon ) -> run and type regedit.

In the registry editor window that opens, navigate to HKEY_LOCAL_MACHINE\ SOFTWARE\Microsoft\ Windows NT\ CurrentVersion\ Winlogon and look for the registry entry “shell”. Click it.

Change the explorer.exe to inf/explorer.exe or whereever you saved the modified explorer.

And believe it or not, you’re done! All you have to do now is reboot or log out and bacö in to see the changes. Enjoy your new custom Windows XP start button!

Internet radio on your mobile...

Internet radio on your mobile...


Mundu Radio is now available on Nokia and Java enable phones as well. Enjoy a number of internet radio stations right from your Nokia and Java enable mobiles.

Nokia and Java enable Device Software includes all the applications on your smartphone – email, organizer, media player, browser, calculator, mundu messenger and now the amazing mundu radio.

Mundu radio is feature-packed with rich UI and services like get lyrics, send lyrics, invite friends, managing playlist, dozens of pre-defined digital radio. In addition, if you have Wi-Fi or UMA enabled on your phone, enjoy the amazing Mundu radio without paying any data charges.

Mundu radio currently supports Nokia and Java enable phones.

So get-started and enjoy the exciting world of mundu on your Nokia and Java enable devices.

For download Mundu radio software pls click here... (register first then download)